Jigsaw (power tool)

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
A power jigsaw
Battery-powered jigsaw
T-shank blades

A jigsaw power tool is a jigsaw made up of an electric motor and a reciprocating saw blade.

Jigsaws with sole plates that have a beveling function can cut angles typically up to 45 degrees relative to the normal vertical stroke to make miter joints.

In the past, what are now usually called scroll saws were often referred to as jigsaws.

History[edit]

In 1946 Albert Kaufmann, an engineer of Scintilla AG company in Solothurn, Switzerland, replaced the needle on his wife's sewing machine with a saw blade.[1][2] In 1947, after development of Kaufmann's invention, Scintilla started producing jigsaws under name "Lesto jigsaw". In 1954 Scintilla was acquired by Bosch and in 1964 the name "Lesto" was replaced with Bosch.

Blades[edit]

A Jigsaw works by attaching a blade accessory to the tool. There are various types of blades in the market. Most jigsaws require a blade to be screwed into the tool, but Bosch has since added the first tool less blade change system allowing a blade to be snapped into the tool.

There are T-shank blades and U-shank blades available in the accessory market. T-Shank blades are the industry-standard professional interface that provides a longer life and a tighter fit from the blade to the tool.

Tooth design is important for the performance of a blade. The tooth spacing, tooth shape, and cutting angle are important in providing speed, cleanliness of cuts, and optimal performance. A side set and ground tooth is designed for clean and fast cuts in wood and plastics. Wavy set and milled teeth will cut most metals as well as aluminum and plastics. A side set and milled tooth works with fast and rougher cuts in wood and plastics. A ground and taper ground tooth is for very precise, fine and clean cuts in wood. There is also reduced-kerf carbide and diamond grit edges for fast cutting in hard materials.

Blade material[edit]

Different blade materials are used for different applications to improve blade life and cutting performance.

High-carbon steel (HCS) is used for softer materials such as wood, laminated particle board, and plastics due to its flexibility.

High-speed steel (HSS) is a stronger steel that can cut all types of metals.

Bi-Metal (BIM) blades contain a combination of high-carbon steel and high-speed steel. The combination creates a strong and flexible material that can be used for demanding applications where there is a risk of breakage or when extreme flexibility and versatility is required. Bi-Metal blades have longer lifespans and prolonged job performance compared to other types of blades.

Tungsten carbide (TC) blades have the strength to cut through abrasive metals such as reinforced plastics, fiberglass, cement board, stainless steel, tile, glass, cast iron, and brick.

Diamond-grit blades are extremely versatile, as they can cut rough materials such as hard porcelain tile, granite, slate, marble, and other stones. due to their finely milled particles. This makes their uses similar to carbide blades, although diamond-grit blades typically last longer.

Controllability[edit]

Control is an issue with jigsaws; the blades are small and weak, with the lower end entirely unsupported. Good cut control requires the presence of blade rollers, which keep the blade aligned just above the sole plate. In addition, heavy-cast sole plate saws are somewhat better than pressed steel for sawing line control. To guide a jigsaw on curved cut, it must be steered (turned) and not forced to move sideways. The use of sharp blades is important as well to get high quality cuts.

See also[edit]

References[edit]

External links[edit]